Polite Society Industries announced its first suppressor line on August 12, 2026: six models in four families covering rimfire, dedicated 5.56, .30-caliber rifles, and a configurable .36/9 mm option. The Tampa company lists MSRPs from $250 to $750 and says it does not sell direct. Buyers will need to locate a dealer, so the announcement establishes the catalog and pricing rather than guaranteeing that a particular dealer has inventory.
Six configurations, two material strategies
The smallest model is the Temperance .22, a direct-thread Grade 5 titanium suppressor measuring 4 inches long, 1.25 inches in diameter, and 3 ounces. Its 1/2x28 mount is integral, and the company rates it for .22 LR, .22 Mag., 5.7x28, and .223 Remington in bolt-action firearms. Construction is laser powder bed fusion with a Type 2 hard-coat anodized finish. MSRP is $250. That caliber list matters: the company does not state a general semiautomatic .223 rating on this rimfire model.
The two Fortitude 5.56 configurations share a 5-inch length, 1.375x24 HUB interface, and included 1/2x28 direct-thread mount with an integrated flash hider. The titanium model weighs 6.40 ounces, while the Fortitude 5.56 HD uses Inconel 625 and weighs 11.5 ounces. Both carry a $600 MSRP. PSI positions titanium for a rifle that is carried and the heavier Inconel version for sustained heat and higher round counts. That is the manufacturer's intended-use distinction, not an independently established firing schedule.
Invalid Date
More Articles
Verdict follows the same split for .30-caliber rifles. Both versions are 6.41 inches long, use the HUB interface, and include a 5/8x24 direct-thread mount with an integrated flash hider. The Grade 5 titanium Verdict 7.62 Ti weighs 8.33 ounces; the Inconel 625 Verdict 7.62 HD weighs 15.4 ounces. Each is listed at $650. PSI identifies .308/7.62, 6.5 Creedmoor, .300 Blackout, and .300 Winchester Magnum as compatible cartridges, giving buyers a broader rifle-caliber option without changing the listed price between alloys.
The $750 Huckleberry is the multi-caliber member of the line. It is 6.5 inches long, 1.75 inches in diameter, weighs 8.6 ounces, and uses Grade 5 titanium. The suppressor is HUB-compatible and supports .22, .30, and .36/9 mm apertures through interchangeable endcaps. It ships with a .36-caliber endcap plus .36-caliber 1/2x28 and 5/8x24 mounts. PSI lists the .22 and .30 endcaps and corresponding mounts as separate purchases, an important distinction from the broad caliber capability described for the body.
One-piece construction and mounting choices
PSI says all six suppressors are made by laser powder bed fusion, which forms the body and internal geometry as one continuous piece rather than joining a tube, baffle stack, and endcap with welds. The company calls its internal arrangement Tripass Core Technology: a central bore and two helical bypass channels feed three expansion and mixing chambers. Those are design descriptions supplied by PSI. The announcement provides no third-party sound-pressure results, flash measurements, backpressure data, accuracy testing, or durability round counts, so comparisons with established suppressors cannot yet be made from the published evidence.
For owners evaluating host compatibility, the practical divide is straightforward. Temperance uses a fixed 1/2x28 direct thread, while Fortitude, Verdict, and Huckleberry use the common 1.375x24 HUB interface. Fortitude arrives with a 1/2x28 mount, Verdict with 5/8x24, and Huckleberry with both thread patterns in its included .36-caliber setup. Integrated wrench flats are listed across the product pages. Owners still need to verify caliber, barrel, thread, mount, and alignment for the individual host rather than treating HUB compatibility or a matching thread pitch as a complete fit determination.
Warranty scope and unresolved details
The company's limited lifetime guarantee follows the suppressor rather than the original purchaser. For covered defects in materials or workmanship under normal use, PSI says it will repair the suppressor without charging for parts or labor, replace it if repair is not practical, or refund the product's MSRP in effect at the time of purchase if replacement is not practical. The exclusions include baffle strikes, modification, neglect, cosmetic wear, loss, and theft. The owner pays shipping to PSI, while the company pays return shipping within the United States.
A replacement carries a new serial number and, according to PSI's warranty terms, must transfer through a dealer on a new ATF Form 4. The company requires return authorization before shipment and asks for the suppressor, photo identification, and a copy of the approved Form 4, or Form 5 where applicable. No dated production target, dealer-stock schedule, independent test release, or published lead time accompanies the launch. The next useful milestone is therefore documented dealer availability and independent performance data for the production models, neither of which PSI has dated.
About the Author
Nick Sawinyh - Nick Sawinyh is a father, husband, hobby farmer, and gun enthusiast from Kentucky. He founded GunsNation and writes most of what appears on this blog.
